Kia Sedona: Front Mud Guard Repair procedures - Body Side Moulding - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Front Mud Guard Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Body Side Moulding / Front Mud Guard Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
After loosening the mounting clip and screws, remove the front mud guard (A).

2.
Install in the reverse order of removal.
   
Replace any damaged clips.
Rear Wheel Guard Repair procedures
Replacement     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Rear Mud Guard Repair procedures
Replacement     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Other Information:

Input Speed Sensor Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. M ...

Airbag Module Disposal Description and Operation
Airbag Disposal Special tool required Deployment tool 0957A-34100A Before scrapping any airbags or side airbags (including those in a whole vehicle to be scrapped), the airbags or side airba ...

Categories

Copyright © www.kisedona.com 2016-2026