Kia Sedona: Description and Operation - Hydraulic System - Automatic Transaxle System - Kia Sedona YP Service ManualKia Sedona: Description and Operation

Third generation YP (2014-2020) / Kia Sedona YP Service Manual / Automatic Transaxle System / Hydraulic System / Description and Operation

Description
The components of the hydraulic system
Automatic Transaxle Fluid (ATF)
Oil pump
Oil filter
Valve body
Operation
1.
The oil pump is powered by the engine.
2.
ATF passes through the oil filter and gets distributed along the oil channels.
3.
TCM controls the hydraulic pressure using solenoid valves and controls clutch and brake operations.

Components and Components Location
Components Location 1. Automatic transaxle assembly2. Valve body assembly 3. Oil pump assembly ...

Oil Pump Components and Components Location
Components Location 1. Automatic transaxle2. Oil pump assembly ...

Other Information:

26 Brake Control Solenoid Valve(26/B_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. Me ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Specifications
Specification Item SpecificationControl typeN/H (Normal High)"Control pressure kpa (kgf/cm², psi)""500.14 ~ 9.81 (5.1 ~ 0.1, 72.54 ~ 1.42)"Current value (mA)50 ~ 850Coil resistance(Ω)5.1 ± 0. ...

Categories

Copyright © www.kisedona.com 2016-2020