Kia Sedona: Crash Pad Side Cover Repair procedures - Crash Pad - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Crash Pad Side Cover Repair procedures

Third generation YP (2014-2020) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Side Cover Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
[LH]
1.
Using a screwdriver or remover, remove the crash pad side cover [LH] (A).

2.
Install in the reverse order of removal.
   
Replace any damaged clips.
[RH]
1.
Using a screwdriver or remover, remove the crash pad side cover [RH] (A).

2.
Install in the reverse order of removal.
   
Replace any damaged clips.
Crash Pad Side Cover Components and Components Location
Component Location [LH] 1. Crash pad side cover [LH] [RH] 1. Crash pad side cover [RH] ...

Crash Pad Center Panel Components and Components Location
Component Location 1. Crash pad center lower panel ...

Other Information:

A/C Pressure Transducer Repair procedures
Inspection 1. Measure the pressure of high pressure line by measuring voltage output between terminals “1” and “2”. 2. Inspect the voltage value to determine whether it is within speci ...

Power Door Mirror Switch Repair procedures
Inspection [Power Mirror Switch (Non-IMS] 1. Disconnect the negative (-) battery terminal. 2. Remove the front left door trim. (Refer to Body - "Front Door Trim") 3. Disconnect the power ...

Categories

Copyright © www.kisedona.com 2016-2020