Kia Sedona: Components and Components Location - Engine Control System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: Components and Components Location

Third generation YP (2014-2021) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Components and Components Location

Components Location

1. Engine Control Module (ECM)
2. Barometric Pressure Sensor (BPS)
3. Manifold Absolute Pressure Sensor (MAPS)
4. Intake Air Temperature Sensor (IATS)
5. Engine Coolant Temperature Sensor (ECTS)
6. Throttle Position Sensor (TPS) [integrated into ETC Module]
7. Crankshaft Position Sensor (CKPS)
8. Camshaft Position Sensor (CMPS) [Bank 1 / Intake]
9. Camshaft Position Sensor (CMPS) [Bank 1 / Exhaust]
10. Camshaft Position Sensor (CMPS) [Bank 2 / Intake]
11. Camshaft Position Sensor (CMPS) [Bank 2 / Exhaust]
12. Knock Sensor (KS) [Bank 1]
13. Knock Sensor (KS) [Bank 2]
14. Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 1]
15. Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 2]
16. Heated Oxygen Sensor (HO2S) [Bank 2 / Sensor 1]
17. Heated Oxygen Sensor (HO2S) [Bank 2 / Sensor 2]
18. Rail Pressure Sensor (RPS)
19. CVVT Oil Temperature Sensor (OTS)
20. Accelerator Position Sensor (APS)
21. A/C Pressure Transducer (APT)
22. Fuel Tank Pressure Sensor (FTPS)
23. Fuel Level Sender (FLS)
24. ETC Motor [integrated into ETC Module]
25. Injector [Bank 1, Bank 2]
26. Purge Control Solenoid Valve (PCSV)
27. CVVT Oil Control Valve (OCV) [Bank 1 / Intake]
28. CVVT Oil Control Valve (OCV) [Bank 1 / Exhaust]
29. CVVT Oil Control Valve (OCV) [Bank 2 / Intake]
30. CVVT Oil Control Valve (OCV) [Bank 2 / Exhaust]
31. Variable Intake Solenoid (VIS) Valve 1
32. Variable Intake Solenoid (VIS) Valve 2
33. Fuel Pressure Control Valve (FPCV)
34. Canister Close Valve (CCV)
35. Injector drive Box (IDB)
36. Ignition Coil
37. Main Relay
38. Fuel Pump Relay
39. Data Link Connector (DLC) [16 Pin]
40. Multi-Purpose Check Connector [20 Pin]

1. Engine Control Module (ECM)
2. Barometric Pressure Sensor (BPS)
4. Intake Air Temperature Sensor (IATS)

3. Manifold Absolute Pressure Sensor (MAPS)
6. Throttle Position Sensor (TPS) [integrated into ETC Module]
5. Engine Coolant Temperature Sensor (ECTS)

7. Crankshaft Position Sensor (CKPS)
8. Camshaft Position Sensor (CMPS) [Bank 1 / Intake]

9. Camshaft Position Sensor (CMPS) [Bank 1 / Exhaust]
10. Camshaft Position Sensor (CMPS) [Bank 2 / Intake]

11. Camshaft Position Sensor (CMPS) [Bank 2 / Exhaust]
12. Knock Sensor (KS) [Bank 1]
13. Knock Sensor (KS) [Bank 2]

14. Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 1]
15.Heated Oxygen Sensor (HO2S) [Bank 1 / Sensor 2]

16. Heated Oxygen Sensor (HO2S) [Bank 2 / Sensor 1]
17. Heated Oxygen Sensor (HO2S) [Bank 2 / Sensor 2]

18. Rail Pressure Sensor (RPS)
19. CVVT Oil Temperature Sensor (OTS)

20. Accelerator Position Sensor (APS)
21. A/C Pressure Transducer (APT)

22. Fuel Tank Pressure Sensor (FTPS)
23. Fuel Level Sender (FLS)

24. ETC Motor [integrated into ETC Module]
25. Injector

26. Purge Control Solenoid Valve (PCSV)
27. CVVT Oil Control Valve (OCV) [Bank 1 / Intake]
29. CVVT Oil Control Valve (OCV) [Bank 2 / Intake]

28. CVVT Oil Control Valve (OCV) [Bank 1 / Exhaust]
30. CVVT Oil Control Valve (OCV) [Bank 2 / Exhaust]

31. Variable Intake Solenoid (VIS) Valve 1
32. Variable Intake Solenoid (VIS) Valve 2

33. Fuel Pressure Control Valve (FPCV)
34. Canister Close Valve (CCV)

35. Injector drive Box (IDB)
36. Ignition Coil [Bank 1]

36. Ignition Coil [Bank 2]

37. Main Relay (EMS Box)
38. Fuel Pump Relay (EMS Box)

39. Data Link Connector (DLC) [16 Pin]
40. Multi-Purpose Check Connector [20 Pin]


Engine Control System
...

Description and Operation
OBD-II review 1. Overview The California Air Resources Board (CARB) began regulation of On Board Diagnostics (OBD) for vehicles sold in California beginning with the 1988 model year. The first ...

Other Information:

Steering Column and Shaft Repair procedures
Removal 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the front wheels can face straight ahead. 3. Rem ...

Oil Filter Body Repair procedures
Removal and Installation 1. Remove the engine cover. (Refer to Engine And Transaxle Assembly - "Engine Cover") 2. Remove the air duct. (Refer to Intake And Exhaust System - "Air Cleaner") ...

Categories

Copyright В© www.kisedona.com 2016-2021