Components |
1. Automatic transaxle assembly 2. Automatic transaxle support bracket 3. Torque convertor 4. Inhibitor switch | 5. Solenoid valve connector 6. Manual control lever 7. ATF cooler pipe 8. Valve body cover |
Hood Latch Release Handle Repair procedures
Replacement
1.
Using a screwdriver or remover, remove the hood release handle (A).
•
Use a 6mm hex bit to press the center until the handle easily pulls off ...
Transaxle Oil Temperature Sensor Description and Operation
Description
•
The sensor used is a thermistor (NTC) in which resistance changes with temperature variation.
•
The TCM supplies about 5 voltage to the sensor; the output value ...