Kia Sedona: Brake Lines, Hoses and Connections Repair procedures - Chassis - Maintenance - Kia Sedona YP Service ManualKia Sedona: Brake Lines, Hoses and Connections Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Maintenance / Chassis / Brake Lines, Hoses and Connections Repair procedures

Inspection
Visually check for proper installation, chafing, cracks, deterioration and any leakage.
Replace any deteriorated or damaged parts immediately.
Brake/Clutch Fluid Repair procedures
Inspection Check the brake fluid level in the brake fluid reservoir. The level should be between “MIN” and “MAX” marks on the side of the reservoir. Use only hydraulic brake fluid con ...

Disc Brakes and Pads Repair procedures
Inspection Check the pads for excessive wear, discs for run out and wear, and calipers for fluid leakage. Front Brake Front brake disc thickness check 1. Check the brake pads for wear and fad ...

Other Information:

To increase cruise control set speed
Follow either of these procedures: Move the lever up (to RES+), and hold it. Your vehicle set speed will increase by 10 km/h (5 mph). Release the lever at the speed you want. Move the lever ...

Alternator Repair procedures
Removal 1. Disconnect the battery negative (-) terminal. 2. Remove the cooling fan. (Refer to Engine Mechanical System - "Cooling Fan") 3. Lift the vehicle. 4. Remove the engine room ...

Categories


Copyright © www.kisedona.com 2016-2025