Kia Sedona: AVN (Audio Video Navigation) head unit Components and Components Location - AVN System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: AVN (Audio Video Navigation) head unit Components and Components Location

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body Electrical System / AVN System / AVN (Audio Video Navigation) head unit Components and Components Location

Components

Connector Pin Information

Connector Pin Information
No.
Connector A
Connector B
Connector C
Connector D
1
-
MM CAN (+)
Chassis CAN (-)
GND
2
-
-
Chassis CAN (+)
GND
3
-
- (Parking)
-
-
4
-
-
-
GND
5
M GND (SPDIF GND)
-
-
Illumination (-)
6
SPDIF (+)
-
Back view camera : (-)
AVM : M GND
Illumination (+)
7
-
-
Back view camera : (-)
AVM : Camera C
Key right
8
Illumination (+)
AUX right
Back view camera : (-)
AVM : Video GND C
Key left
9
R Position
AUX GND
-
Right CW
10
-
MIC (+)
-
Left CCW
11
-
Battery (+)
Body CAN (+)
Left CW
12
-
Battery (+)
Body CAN (-)
Right CCW
13
-
MM CAN (-)
Back view camera : (-)
AVM : M GND
 
 
 
14
IGN1
- (Auto Light)
Air bag
15
SPDIF (-)
P Position
-
16
Door unlock
Speed
Navi voice (-)
17
Illumination (-)
M GND (R GND)
Navi voice (+)
18
Remote antenna
ACC
Door open
19
 
-
-
20
AUX Detect
-
21
AUX left
M GND
22
Mic (-)
V GND
23
M GND
Camera VIN(Y)
24
M GND
Back view camera : Camera B
AVM : (-)

Description and Operation
Description AVN system The AVN system provides improved search function and easy access for drivers by offering simplified system operation experience and integrated display for multimedia and ...

AVN (Audio Video Navigation) head unit Repair procedures
Removal     • Take care not to scratch the cluster fascia panel and related parts. • Eject all the disc before removing the AVN head unit to prevent da ...

Other Information:

Operating conditions
Type B Type C Select RCTA (Rear Cross Traffic Alert) in "User Settings" under "Driving Assist" on the instrument cluster. The system will turn on and standby to activat ...

Rail Pressure Sensor (RPS) Repair procedures
Inspection 1. Connect the GDS to the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. Removal 1. Turn the ignition switch OFF and d ...

Categories

Copyright © www.kisedona.com 2016-2026