Kia Sedona: 192,000 km (120,000 miles) or 96 months - Normal maintenance schedule - Maintenance - Kia Sedona YP Owners ManualKia Sedona: 192,000 km (120,000 miles) or 96 months

Third generation YP (2014-2026) / Kia Sedona YP Owners Manual / Maintenance / Normal maintenance schedule / 192,000 km (120,000 miles) or 96 months

❑ Rotate tire
❑ Inspect battery condition
❑ Inspect vacuum hose
❑ Inspect air conditioning refrigerant
❑ Inspect brake hoses and lines
❑ Inspect drive shafts and boots
❑ Inspect exhaust system
❑ Inspect front brake disc/pads, calipers
❑ Inspect rear brake disc/pads
❑ Inspect steering gear box, linkage & boots/lower arm ball joint, upper arm ball joint
❑ Inspect suspension mounting bolts
❑ Inspect brake fluid
❑ Inspect fuel filter *2
❑ Inspect fuel lines, fuel hoses and connections
❑ Inspect fuel tank air filter *2
❑ Inspect parking brake
❑ Inspect valve clearance *3
❑ Inspect vapor hose and fuel filler cap
❑ Inspect drive belts *3 (First, 96,000 km (60,000 miles) or 72 months after that, every 24,000 km (15,000 miles) or 24 months)
❑ Inspect power steering fluid (if equipped)
❑ Inspect power steering pump, belt and hoses (if equipped)
❑ Replace climate control air filter (for evaporator and blower unit)
❑ Replace air cleaner filter
❑ Replace engine oil and filter (Every 12,000 km (7,500 miles) or 12 months)
❑ Replace coolant (First, 192,000 km (120,000 miles) or 120 months after that, every 48,000 km (30,000 miles) or 24 months)
❑ Add fuel additive *1 (Every 12,000 km (7,500 miles) or 12 months)

180,000 km (112,500 miles) or 90 months
❑ Rotate tire ❑ Inspect battery condition ❑ Inspect air cleaner filter ❑ Inspect vacuum hose ❑ Inspect power steering fluid (if equipped) ❑ Inspect power ...

204,000 km (127,500 miles) or 102 months
❑ Rotate tire ❑ Inspect battery condition ❑ Inspect air cleaner filter ❑ Inspect vacuum hose ❑ Inspect power steering fluid (if equipped) ❑ Inspect power ...

Other Information:

Front Washer Motor Repair procedures
Inspection Front Washer Motor 1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water.     Before filling the reservoir tank with wa ...

Cooling Fan Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the air duct (A). 3. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover") 4. Disconnec ...

Categories

Copyright © www.kisedona.com 2016-2026