Kia Sedona: Timing System

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Engine Mechanical System / Timing System

Oil Level Gauge & Pipe Repair procedures

Removal and Installation 1. Remove the oil level gauge rod (A) and the oil level gauge (B). Tightening torque: 18.6 ~ 22.6 N.m (1.9 ~ 2.3 kgf.m, 13.7 ~ 16.6 lb-ft)     ...

Components and Components Location

Components 1. Drive belt (with HPS)2. Drive belt (with MDPS)3. Drive belt tensioner4. Idler5. Crankshaft damper pulley6. Water pump pulley 1. Timing chain cover2. Oil pump chain cover3. Oil ...

Other Information:

Water Jacket Seperator Repair procedures
Removal 1. Remove the LH/RH cylinder head assembly and gasket. (Refer to Cylinder Head Assembly - "Cylinder Head") 2. Remove the water jacket seperators (A). Installation 1. Install the ...

Checking the engine oil level
1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...