Kia Sedona: Ignition System

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Engine Electrical System / Ignition System

Cruise Control Switch Repair procedures

Inspection Measuring Resistance 1. Disconnect the cruise control switch connector from the control switch. 2. Measure the resistance between terminals on the control switch when each funct ...

Description and Operation

Description Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are pre-programmed in ...

Other Information:

Tire sidewall labeling
This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be use ...

Transaxle Oil Temperature Sensor Description and Operation
Description • The sensor used is a thermistor (NTC) in which resistance changes with temperature variation. • The TCM supplies about 5 voltage to the sensor; the output value ...