Kia Sedona: Ignition Coil Specifications - Ignition System - Engine Electrical System - Kia Sedona YP Service ManualKia Sedona: Ignition Coil Specifications

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Engine Electrical System / Ignition System / Ignition Coil Specifications

Specification
Item
Specification
Rated Voltage (V)
12
Operating Voltage (V)
5 ~ 16
Primary Coil Resistance (Ω)
0.62 ± 10% [20°C (68°F)]
Secondary Coil Resistance (kΩ)
7.0 ± 15% [20°C (68°F)]

Repair procedures
On-vehicle Inspection Inspect ignition coil assembly and Perform spark test 1. Check for DTCs.     • If a DTC is present, perform troubleshooting in accordanc ...

Ignition Coil Description and Operation
Description An ignition coil is an induction coil in an engine''s ignition system which transforms the battery''s low voltage to the high voltage needed to create an electric spark in the spark ...

Other Information:

Engine compartment fuse replacement
1. Turn the ignition switch and all other switches off. 2. Remove the fuse panel cover by pressing the tab and pulling the cover up. When the blade type fuse is disconnected, remove it by using th ...

Smart Tailgate Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage side trim [RH]. (Refer to Body - "Luggage Side Trim") 3. Disconnect the smart tailgate unit connector (A). ...

Categories


Copyright © www.kisedona.com 2016-2025