Kia Sedona: Variable Intake Solenoid(VIS) Actuator Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Engine Mechanical System / Intake And Exhaust System / Variable Intake Solenoid(VIS) Actuator Repair procedures

Removal and Installation

VIS 1 [Intake Manifold]

1.	Disconnect the battery "-" terminal.

2.	Remove the engine cover. (Refer to Engine and Transaxle Assembly - "Engine Cover")

3.	Disconnect the VIS actuator hose (A).

Remove the VIS actuator (B).

Tightening torque :

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

5.	Install in the reverse order of removal.

VIS 2 [Surge Tank]

1.	Disconnect the battery "-" terminal.

2.	Remove the engine cover. (Refer to Engine and Transaxle Assembly - "Engine Cover")

3.	Disconnect the VIS actuator hose (A).

Remove the VIS actuator (B).

Tightening torque :

9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

5.	Install in the reverse order of removal.

Exhaust Manifold Repair procedures

Removal and Installation [LH Exhaust Manifold] 1. Disconnect the battery negative terminal. 2. Remove the engine cover. (Refer to Engine and Transaxle Assembly - "Engine Cover") 3. Remov ...

Muffler Components and Components Location

Components 1. Gasket2. Hanger3. Front muffler4. Catalytic converter & Center muffler assembly5. Rear muffler6. Tail muffler ...

Other Information:

Seat Belt Buckle Switch (BS) Components and Components Location
Components ...

Tire pressure
Always observe the following: Check tire pressure when the tires are cold. (After vehicle has been parked for at least three hours or hasn't been driven more than 1.6 km (one mile) since ...

Kia Sedona: Variable Intake Solenoid(VIS) Actuator Repair procedures

Exhaust Manifold Repair procedures

Muffler Components and Components Location

Other Information:

Categories