Kia Optima Manuals

Kia Sedona: Drive Belt Tensioner Repair procedures - Timing System - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Drive Belt Tensioner Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Engine Mechanical System / Timing System / Drive Belt Tensioner Repair procedures

Removal and Installation
1.
Remove the drive belt idler.
(Refer to Timing System - "Idler")
2.
Remove the drive belt auto tensioner (A).
Tightening torque
Bolt (B) :
81.4 ~ 85.3 N.m (8.3 ~ 8.7 kgf.m, 60.0 ~ 62.9 lb-ft)
Bolt (C) :
17.7 ~ 21.6 N.m (1.8 ~ 2.2 kgf.m, 13.0 ~ 15.9 lb-ft)

3.
Install in the reverse order of removal.
Inspection
Check the belt tensioner for excessive dust, crack, and damage. Replace if necessary.
Drive Belt Tensioner Components and Components Location
Components 1. Drive belt tensioner ...

Crankshaft Damper Pulley Components and Components Location
Components 1. Crankshaft damper pulley ...

Other Information:

Warning type
The system will activate when: 1.The system is on. 2.Vehicle speed is above 30 km/h (18.6 mph ). 3.Other vehicles are detected in the rear side. WARNING The Blind Spot Detection System with L ...

Climate Control Air Filter Repair procedures
Filter inspection The climate control air filter should be replaced according to the maintenance schedule. If the vehicle is operated in severely polluted city or on dusty rough roads for a long ...

Categories


Copyright В© www.kisedona.com 2016-2025