Kia Sedona: Vanity Lamp Repair procedures - Lighting System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Vanity Lamp Repair procedures

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body Electrical System / Lighting System / Vanity Lamp Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Detach the vanity lamp (A) using a flat-tip screwdriver.

3.
Disconnect the vanity lamp connector (A).

Installation
1.
Connect the vanity lamp connector.
2.
Install the vanity lamp.
3.
Connect the negative (-) battery terminal.
Luggage Room Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the luggage room lamp lens (A) from the luggage room lamp with a flat-tip screwdriver. 3. Remove the luggage room lamp (A ...

Personal Lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Detach the personal lamp (A) using a flat-tip screwdriver. 3. Disconnect the personal lamp connector (A). Installation 1. C ...

Other Information:

In case of an emergency while driving
If the engine stalls at a crossroad or crossing If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. If you h ...

Front Driveshaft Repair procedures
Removal 1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)     Be careful not to dam ...

Categories

Copyright © www.kisedona.com 2016-2025