Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Detach the luggage room lamp lens (A) from the luggage room lamp with a flat-tip screwdriver. |
3. |
Remove the luggage room lamp (A) after loosening the screws. |
4. |
Disconnect the luggage room lamp connector (A). |
1. |
Detach the luggage room lamp lens (A) from the luggage room lamp with a flat-tip screwdriver. |
2. |
Disconnect the luggage room lamp bulb (A). |
Installation |
1. |
Connect the luggage room lamp connector. |
2. |
Install the luggage room lamp. |
3. |
Install the luggage room lamp lens. |
4. |
Connect the negative (-) battery terminal. |
Engine Cover Repair procedures
Removal and Installation
1.
Remove the engine cover (A).
•
Lift up the lower end of engine cover, then left and right alternately.
•
When install ...
Heated Oxygen Sensor (HO2S) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S terminals 3 and 4.
4.
Check that the resistance is within the speci ...