Kia Sedona: Hood Latch Components and Components Location - Hood - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Hood Latch Components and Components Location

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Components and Components Location

Component Location

1. Hood lower latch assembly

Hood Latch Release Handle Repair procedures
Replacement 1. Using a screwdriver or remover, remove the hood release handle (A).     • Use a 6mm hex bit to press the center until the handle easily pulls off ...

Hood Latch Repair procedures
Replacement 1. Loosen the fastener and remove the front bumper upper cover (A). 2. Remove the hood lower latch assembly (A) mounting bolts. Tightening torque : 7.8 ~ 11.8N.m (0.8 ~ 1.2kgf. ...

Other Information:

Repair procedures
Removal 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the front wheels can face straight ahead. 3. R ...

Heated Steering wheel Schematic Diagrams
System Circuit Diagram ...

Categories

Copyright © www.kisedona.com 2016-2026