Kia Sedona: Light bulbs
WARNING - Working on the lights
Prior to working on the light, firmly apply the parking brake, ensure that the ignition switch is turned to the LOCK position and turn off the lights to avoid sudden movement of the vehicle and burning your fingers or receiving an electric shock.
Use only the bulbs of the specified wattage.
CAUTION - Light replacement
Be sure to replace the burnedout bulb with one of the same wattage rating. Otherwise, it may cause damage to the fuse or electric wiring system.
✽ NOTICE
- If the light bulb or lamp connector is removed from an operating lamp activated by electricity, the fuse box
Engine compartment fuse panel
Engine compartment fuse panel
...
Front light bulb replacement
Type A
(1) Headlight (High)
(2) Headlight (Low)
(3) Turn signal light / Position light (if equipped)
(4) Side marker light
(5) Front fog light (if equipped)
(6) Position light (if equipped)
...
Other Information:
Intake Air Temperature Sensor (IATS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS terminals 3 and 4.
4.
Check that the resistance is within the speci ...
Rear Door Latch Components and Components Location
Component Location
1. Rear door front latch2. Rear door rear latch
...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
