Kia Optima Manuals

Kia Sedona: ETC (Electronic Throttle Control) System Specifications - Engine Control System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: ETC (Electronic Throttle Control) System Specifications

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / ETC (Electronic Throttle Control) System Specifications

Specification
[Throttle Position Sensor (TPS)]
Throttle angle(°)
Output Voltage (V) [Ref=5V]
TPS1
TPS2
0
0.5
4.5
10
0.96
4.05
20
1.41
3.59
30
1.87
3.14
40
2.32
2.68
50
2.78
2.23
60
3.23
1.77
70
3.69
1.32
80
4.14
0.86
90
4.6
0.41
98
4.65
0.35
C.T (0)
0.5
4.5
W.O.T (86)
4.41
0.59

[ETC Motor]
Item
Specification
Coil Resistance (Ω)
0.3 ~100 [20°C(68°F)]

Injector Drive Box (IDB) Repair procedures
Removal 1. Turn the ignition switch off and disconnect the battery negative (-) Terminal. 2. Remove the mounting nuts (A) and disconnect the connector (B), and then remove the injector drive b ...

ETC (Electronic Throttle Control) System Description and Operation
Description The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle cab ...

Other Information:

Receiver-Drier Repair procedures
Replacement 1. Remove the condenser. 2. Remove the cap (B) on the bottom of the condenser with an L wrench (A). Tightening torque : 9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft) ...

Vehicle weight glossary
This section will guide you in the proper loading of your vehicle and/or trailer, to keep your loaded vehicle weight within its design rating capability, with or without a trailer. Properly loadin ...

Categories

Copyright © www.kisedona.com 2016-2026