Kia Sedona: Drive Plate Components and Components Location - Cylinder Block - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Drive Plate Components and Components Location

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Mechanical System / Cylinder Block / Drive Plate Components and Components Location

Components

1. Drive plate
2. Adapter plate

Water Jacket Seperator Repair procedures
Removal 1. Remove the LH/RH cylinder head assembly and gasket. (Refer to Cylinder Head Assembly - "Cylinder Head") 2. Remove the water jacket seperators (A). Installation 1. Install the ...

Drive Plate Repair procedures
Removal and Installation 1. Remove the automatic transaxle. (Refer to Automatic Transaxle System - "Automatic Transaxle") 2. Remove the adapter plate (A) and the drive plate (B). Tighten ...

Other Information:

Fuel Pressure Control Valve (FPCV) Repair procedures
Inspection 1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal. 2. Disconnect the fuel pressure regulator valve connector. 3. Measure resistance between the fu ...

KEY OUT indicator
When the ENGINE START/STOP button is in the ACC or ON position, if any door is open, the system checks for the smart key. If the smart key is not in the vehicle, the indicator will blink, and if ...

Categories

Copyright © www.kisedona.com 2016-2026