Kia Sedona: Drive Plate Repair procedures - Cylinder Block - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Drive Plate Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Mechanical System / Cylinder Block / Drive Plate Repair procedures

Removal and Installation
1.
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the adapter plate (A) and the drive plate (B).

Tightening torque :
71.6 ~ 75.5 N.m (7.3 ~ 7.7 kgf.m, 52.8 ~ 55.7 lb-ft)

3.
Install in the reverse order of removal.
Drive Plate Components and Components Location
Components 1. Drive plate2. Adapter plate ...

Rear Oil Seal Components and Components Location
Components 1. Rear oil seal2. Oil seal case ...

Other Information:

Battery replacement
When replacement is necessary, use the following procedure. 1. Insert a slim tool into the slot and gently try open the battery cover. 2. Replace the batteries with new rechargeable batteries (AAA ...

FM reception
AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle. This signal is then processed by the radio and ...

Categories

Copyright © www.kisedona.com 2016-2026