Kia Sedona: Blower

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Heating,Ventilation And Air Conditioning / Blower

Mode Control Actuator Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when 12V is connected t ...

Blower Unit Components and Components Location

Components Location 1. Blower Unit Components 1. Inlet Seal2. Intake Actuator3. Antinoise Pad4. Blower Upper Case5. Blower Lower Case6. Blower Motor7. Inlet Duct Upper Case8. Inlet Door As ...

Other Information:

ETC (Electronic Throttle Control) System Repair procedures
Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T. Throttle ...

Map lamp
Press the lens (1) to turn the map lamp on or off (2) : The light comes on when any door (or tailgate) is opened regardless of the ignition switch position. When doors are unlocked by the ...