Type A
Type B (for SXL package)
The 2nd row seats have the armrest located on the side of seatback.
Type A
To use the armrest, swing down the armrest to the lowest position.
Type B
To use the armrest, press the release button
(1) on the armrest and adjust the angle to the desired position. And then release the button (1).
Purge Control Solenoid Valve (PCSV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the PCSV connector.
3.
Measure resistance between the PCSV terminals 1 and 2.
4.
Check that the resistance is within the speci ...
Center Pillar Trim Components and Components Location
Component Location
1. Center pillar lower trim2. Center pillar upper trim
...