Specification
Starter
ItemSpecificationRated voltage12 V, 1.7 kWThe number of pinion teeth12Performance[No-load, 11.5 V]AmpereMax.85 ASpeedMin. 2,550 rpm
...
Other Information:
Power Steering Hoses Repair procedures
Removal
1.
Drain the power steering fluid.
2.
Remove the surge tank.
(Refer to Engine Mechanical System - "Surge Tank")
3.
Remove the center muffler
(Refer to Engine Mechanical System - ...
Intake Actuator Description and Operation
Description
The intake actuator is located at the blower unit. It
regulates the intake door by a signal from the control unit. Pressing
the intake selection switch will shift between recirculat ...