Kia Sedona: Sunroof Inside Air Recirculation - Heating and air conditioning - Manual climate control system - Features of your vehicle - Kia Sedona YP Owners ManualKia Sedona: Sunroof Inside Air Recirculation

Third generation YP (2014-2020) / Kia Sedona YP Owners Manual / Features of your vehicle / Manual climate control system / Heating and air conditioning / Sunroof Inside Air Recirculation

When the heater or air conditioning system is on with the sunroof opened, the outside (fresh) air position will be automatically selected. At this time, if you press the recirculated air position button, the recirculated air position will be selected but will change back to the outside (fresh) air position after 3 minutes.

When the sunroof is closed, the air intake position will return to the original position that was selected.

WARNING - Reduced visibility

Continued use of the climate control system in the recirculated air position may allow humidity to increase inside the vehicle which may fog the glass and obscure visibility.

WARNING - Sleeping with AC on

Do not sleep in a vehicle with the air conditioning or heating system on as this may cause serious harm or death due to a drop in the oxygen level and/or body temperature.

WARNING - Recirculated air

Continued use of the climate control system in the recirculated air position can cause drowsiness or sleepiness, and loss of vehicle control. Set the air intake control to the outside (fresh) air position as much as possible while driving.

Air intake control
Type A The air intake control is used to select the outside (fresh) air position or recirculated air position. To change the air intake control position, press the control button. Recirculated ...

Fan speed control
The ignition switch must be in the ON position for fan operation. The fan speed control knob allows you to control the fan speed of the air flowing from the ventilation system. To change the fan ...

Other Information:

Fan speed control
The fan speed can be set to the desired speed by operating the fan speed control button. To change the fan speed, press () the button for higher speed, or push () the button for lower speed. ...

Transaxle ranges
The indicator in the instrument cluster displays the shift lever position when the ignition switch is in the ON position. P (Park) Always come to a complete stop before shifting into P (Park). Thi ...

Categories

Copyright В© www.kisedona.com 2016-2020