Kia Sedona: Specifications
Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Body Electrical System / AVN System / Specifications
| Specifications |
AVN Head Unit
| Item | Specification | |
| Power supply | DC 14.4V Negative ground | |
| Tuning type | PLL SYNTHESIZED TUNING | |
| Load impedance | 2Ω x 4 (Front/Rear/Woofer) | |
| 4Ω x 2 (Tweeter) | ||
| Antenna | 80PF 75Ω | |
| Dark current | Max. 4.0mA (Head unit only) | |
| Frequency range / Channel space | FM | 87.5~107.9 MHz / 200 kHz |
| AM | 530~1,710 kHz / 10 kHz | |
| S/N | FM | MIN 50 dB |
| AM | MIN 45 dB | |
Speaker
| Item | Specification | |
| Input Power | Front | 25W (Max 50W) |
| Rear | 25W (Max 50W) | |
| Center | 25W (Max 50W) | |
| Front tweeter | 13W (Max 25W) | |
| Sub woofer | 100W (Max 50W x 2) | |
| Speaker Impedance | Front | 2.0 ± 0.3 Ω |
| Rear | 2.0 ± 0.3 Ω | |
| Center | 2.0 ± 0.3 Ω | |
| Front tweeter | 3.2 Ω | |
| Sub woofer | 5.0 ± 0.8 Ω | |
| Number of speakers | 8 | |
AVN System
...
Components and Components Location
Component Location
1. AVN head unit2. Tweeter speaker3. Center speaker4. Roof antenna5. Front speaker6. Rear speaker7. Sub woofer speaker8. Antenna feeder cable9. Antenna cable connector10. Exter ...
Other Information:
Water Temperature Control Assembly Components and Components Location
Components
1. Water pipe 2. Throttle body coolant hose & pipe3. Water temperature control assembly4. O-ring
...
Immobilizer Control Unit Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Disconnect the connector of the immobiliz ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2025 Owners Manual
- Kia Sedona YP 2014-2025 Service Manual
Copyright © www.kisedona.com 2016-2025