Kia Sedona: Starter Components and Components Location| Components |

| 1. Front bracket assembly 2. Clutch set assembly 3. Lever 4. Lever packing 5. Magnetic switch assembly 6. Through bolt 7. Planet gear | 8. Shield 9. Armature assembly 10. Yoke assembly 11. Brush holder assembly 12. Rear bracket assembly 13. Screw 14. Nut | 15. Name plate 16. Stop ring 17. Snap ring 18. Overrunning clutch (ORC) assembly 19. Internal gear assembly 20. Planet shift assembly |
Starter Specifications
Starter Description and OperationRear Stabilizer Bar Repair procedures
Removal
1.
Remove the rear wheel and tire (A) from rear hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
Be careful not to damage ...
Engine coolant
The high-pressure cooling system has a reservoir filled with year round antifreeze
coolant. The reservoir is filled at the factory.
Check the antifreeze protection and coolant level at least once a ...