Specification
Starter
ItemSpecificationRated voltage12 V, 1.7 kWThe number of pinion teeth12Performance[No-load, 11.5 V]AmpereMax.85 ASpeedMin. 2,550 rpm
...
Other Information:
Heated Oxygen Sensor (HO2S) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S terminals 3 and 4.
4.
Check that the resistance is within the speci ...
Indicator light
When ignition switch is turned to ON, the indicator light illuminates, then goes
off if the ESC system is operating normally.
The ESC indicator light blinks whenever ESC is operating or illuminat ...