Kia Sedona: Smart Cruise Control Unit Description and Operation
Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Electrical System / Smart Cruise Control System / Smart Cruise Control Unit Description and Operation
| Description |
The smart cruise control unit is installed on the front
right-hand side of the chassis. A radar sensor is embedded in the front
section of the unit. This sensor detects vehicles and objects in front
of the vehicle. The radar sensor can detect up to 64 objects ahead of
the vehicle. The alarm goes off when the vehicle deviates from the
horizontal and vertical alignment reference points during operation.
This sensor communicates with the dashboard, warning buzzer, smart
cruise control switch, Electronic Stability Program (ESP), ECM, and TCM
via CAN communication. The sensor controls vehicle speed through CAN
communication between the Electronic Stability Program (ESP) system and
the ECM and TCM.
Smart Cruise Control Unit Components and Components Location
Component Location
...
Smart Cruise Control Unit Schematic Diagrams
Circuit Diagram
...
Other Information:
Description and Operation
Description
Ignition timing is controlled by the electronic control ignition timing system.
The standard reference ignition timing data for the engine
operating conditions are pre-programmed in ...
External AMP Components and Components Location
Components
Connector Pin Information
No.Connector ANo.Connector B1Left front door (+)1Center front (+)2Right front door (+)2-3Left side door (+)3-4Right side door (+)4-5Subwoofer 2 (+)5Navi (+)6 ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
Copyright © www.kisedona.com 2016-2026