Kia Optima Manuals

Kia Sedona: Oil Level Gauge & Pipe Repair procedures - Lubrication System - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Oil Level Gauge & Pipe Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Mechanical System / Lubrication System / Oil Level Gauge & Pipe Repair procedures

Removal and Installation
1.
Remove the oil level gauge rod (A) and the oil level gauge (B).
Tightening torque:
18.6 ~ 22.6 N.m (1.9 ~ 2.3 kgf.m, 13.7 ~ 16.6 lb-ft)

   
When installing, apply engine oil to the O-ring and take care the O-ring not to be damaged.
Always use a new O-ring.
2.
Install in the reverse order of removal.
Oil Level Gauge & Pipe Components and Components Location
Components 1. Oil level gauge2. Oil level gauge pipe3. O-ring ...

Timing System
...

Other Information:

Torque Converter Control Solenoid Valve (T/CON_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. Me ...

Steering wheel remote controller
(1) VOLUME Used to control volume. (2) SEEK When pressed briefly (less than 1 second). - FM, AM mode : searches broadcast frequencies saved to presets. - CD, USB, iPod ...

Categories

Copyright © www.kisedona.com 2016-2026