The reservoir is translucent so that you can check the level with a quick visual inspection.
Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use washer solvent with antifreeze characteristics in cold climates to prevent freezing.
WARNING - Flammable Fluid
Do not allow the washer fluid to come in contact with open flames or sparks.The windshield washer fluid reservoir is flammable under certain circumstances. This can result in a fire.
Components and Components Location
Component Location Index
Engine Room
1. Ambient temperature Sensor2. Receiver-drier3. Condenser4. Compressor5. Discharge Hose6. Service Port (Low Pressure)7. Service Port (High Pressure)8. A/C P ...
Oil Pressure Switch Repair procedures
Removal and Installation
1.
Remove the air duct.
(Refer to Intake And Exhaust System - "Air Cleaner")
2.
Remove the battery.
(Refer to Engine Electrical System - "Battery")
3.
Remove th ...