Kia Sedona: Non-operational conditions of rear parking assist system - Rear parking assist system - Features of your vehicle - Kia Sedona YP Owners ManualKia Sedona: Non-operational conditions of rear parking assist system

Third generation YP (2014-2024) / Kia Sedona YP Owners Manual / Features of your vehicle / Rear parking assist system / Non-operational conditions of rear parking assist system

The rear parking assist system may not operate properly when :

1. Moisture is frozen to the sensor. (It will operate normally when the moisture has been cleared.)

2. The sensor is covered with foreign matter, such as snow or water, or the sensor cover is blocked. (It will operate normally when the material is removed or the sensor is no longer blocked.)

3. Driving on uneven road surfaces (unpaved roads, gravel, bumps, gradient).

4. Objects generating excessive noise (vehicle horns, loud motorcycle engines, or truck air brakes) are within range of the sensor.

5. Heavy rain or water spray exists.

6. Wireless transmitters or mobile phones are within range of the sensor.

7. The sensor is covered with snow.

8. Trailer towing

The detecting range may decrease when :

1. The sensor is stained with foreign matter such as snow or water. (The sensing range will return to normal when removed.)

2. Outside air temperature is extremely hot or cold.

The following objects may not be recognized by the sensor :

1. Sharp or slim objects such as ropes, chains or small poles.

2. Objects which tend to absorb the sensor frequency such as clothes, spongy material or snow.

3. Undetectable objects smaller than 1 m (40 in.) in height and narrower than 14 cm (6 in.) in diameter.

Types of warning sound
When an object is 120 cm to 61 cm (47 in. to 24 in.) from the rear bumper : Buzzer beeps intermittently. When an object is 60 cm to 31 cm (24 in. to 12 in.) from the rear bumper : Buzzer be ...

Rear parking assist system precautions
The rear parking assist system may not sound consistently depending on the speed and shapes of the objects detected. The rear parking assist system may malfunction if the vehicle bumper height ...

Other Information:

Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the ECTS connector. 3. Remove the ECTS (Refer to "Removal"). 4. After immersing the thermistor of the sensor into engine coola ...

Repair procedures
Removal     Take care not to scratch the crash pad and related parts. 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing. (Refer to B ...

Categories


Copyright В© www.kisedona.com 2016-2024