Kia Sedona: Instrument Cluster Control
Third generation YP (2014-2026) / Kia Sedona YP Owners Manual / Features of your vehicle / Instrument cluster / Instrument Cluster Control
Adjusting Instrument Cluster Illumination
The brightness of the instrument panel illumination is changed by pressing the illumination control button ("+" or "-") when the ignition switch or Engine Start/Stop button is ON, or the tale lights are turned on.
Type A
Type B, C
- If you hold the illumination control button ("+" or "-"), the brightness will be changed continuously.
- If the brightness reaches to the maximum or minimum level, an alarm will sound.
Instrument cluster
Type A
Type B
Type C
1. Tachometer
2. Speedometer
3. Engine coolant temperature gauge
4. Fuel gauge
5. LCD display
6.Warning and indicator lights ...
LCD Display Control
Type A
The LCD display modes can be changed by using the control buttons on the steering
wheel.
[Type A]
(1) ▲ / ▼ : TRIP scroll switch for changing trip modes
(2) RESET : RESET bu ...
Other Information:
Safety chains
You should always attach chains between your vehicle and your trailer. Cross
the safety chains under the tongue of the trailer so that the tongue will not drop
to the road if it becomes separated ...
Repair procedures
Inspection
Special care is needed for the following points in case of working with the non-gloss timber trimming.
•
Wrap a protective tape around tools used ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
Copyright © www.kisedona.com 2016-2026