Kia Sedona: Climate Seat Unit Description and Operation

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body Electrical System / Seat Electrical / Climate Seat Unit Description and Operation

Description

The ventilated seat system generates cool wind by the Push method in the blower mounted under the seat which then travels through ducts to the seat back and cushion.

•	Be careful not to spill drink or water on the seat equipped with ventilation system.

•	As the blower draws in only small amount of air, it is hard to feel the air strength by touching it.

Climate Seat Unit Schematic Diagrams

Circuit Diagram ...

Climate Seat Unit Repair procedures

Removal [Ventilation Blower] 1. Disconnect the negative (-) battery terminal. 2. Remove the front seat assembly. (Refer to Body - "Front Seat Assembly") 3. Remove the front seat outer s ...

Other Information:

Roof Trim Assembly Repair procedures
Replacement Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

3 Point rear center belt (for 2nd and/ 3rd center seat)
To fasten the rear center belt 1. Pull out the mini tongue from hole on the belt assembly cover (1) and then slowly pull the seat belt out from the retractor. 2. Pull out the tongue plate from ...

Kia Sedona: Climate Seat Unit Description and Operation

Climate Seat Unit Schematic Diagrams

Climate Seat Unit Repair procedures

Other Information:

Categories