Kia Sedona: Seat Heater Switch Repair procedures| Removal |
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the console upper cover (A).
(Refer to Body - "Floor Console Assembly")
|
| 3. |
Disconnect the multimedia connectors (A) and main connectors (B).
|
| 4. |
Disconnect the front seat heater switch connector (A) from console upper cover.
|
| 5. |
Remove the front seat heater switch (A) after loosening the screws.
|
| 1. |
Disconnect the negative (-) battery terminal. |
| 2. |
Remove the rear console cover.
(Refer to Body - "Rear Console Cover") |
| 3. |
Remove the floor console tray (A) after loosening the screws.
|
| 4. |
Remove the rear console switch panel (A) after loosening the screws.
|
| 5. |
Remove the second row seat heater switch (A) by pushing the hooks.
|
| Installation |
| 1. |
Install the first row seat heater switch. |
| 2. |
Connect the first row seat heater switch connector. |
| 3. |
Connect the console upper cover connector. |
| 4. |
Install the console upper cover. |
| 5. |
Connect the negative (-) battery terminal. |
| 1. |
Install the second row seat heater switch. |
| 2. |
Install the rear console switch panel. |
| 3. |
Install the floor console tray. |
| 4. |
Install the rear console cover. |
| 5. |
Connect the negative (-) battery terminal. |
Seat Heater Switch Schematic Diagrams
Climate Seat Unit Components and Components LocationPower Sliding Door (PSD) Control Module Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the luggage side trim [LH].
(Refer to Body - "Luggage Side Trim")
3.
Disconnect the power sliding door control module co ...
Power tailgate non-opening conditions
The power tailgate will not open automatically, but will close under the following
conditions.
When the ignition switch is in the ON position,
1. Vehicle is moving above 3 km/h (2 mph).
2. The ge ...