Kia Sedona: Repair procedures - Back view camera System - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body Electrical System / Back view camera System / Repair procedures

Removal
1.
Disconnect the negetive (-) battery terminal.
2.
Remove the tailgate back panel.
(Refer to Body - "Tailgate Back Panel")
3.
Remove the back view camera (A) after loosening the screws (2EA).

Installation
1.
Install the back view camera.
2.
Install the tailgate back panel.
Description and Operation
Description Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This supplemental system shows the back of the vehicle on ...

BCM (Body Control Module)
...

Other Information:

Turn on FUSE SWITCH
This warning message illuminates if the fuse switch on the fuse box is OFF. It means that you should turn the fuse switch on. For more details, refer to ...

Outside rearview mirror
Be sure to adjust the mirror angles before driving. Your vehicle is equipped with both left-hand and right-hand outside rearview mirrors. The mirrors can be adjusted remotely with the remote switch ...

Categories

Copyright © www.kisedona.com 2016-2026