Kia Sedona: Front Seat Belt Buckle Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Seat Belt / Front Seat Belt Buckle Repair procedures

Replacement

1.	Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")

2.	Disconnect the front seat belt buckle connector wiring (A).

After loosening the mounting bolt, remove the front seat belt buckle (A).

Tightening torque :

39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)

Install in the reverse order of removal.

Make sure that the connectors are plugged in properly.

Front Seat Belt Buckle Components and Components Location

Component Location 1. Front seat belt buckle ...

Rear Seat

...

Other Information:

Seat belt warning (for front passenger
Type A Type B The front passenger's seat belt warning light will activate to the following table when the ignition switch is in "ON" position. *1 The seat belt warning light w ...

Heater & A/C Control Unit (DATC) Repair procedures
Self Diagnosis 1. Self-diagnosis process 2. How to read self-diagnostic code After the display panel flickers three times at 0.5 second intervals, the corresponding fault code flickers on t ...

Kia Sedona: Front Seat Belt Buckle Repair procedures

Front Seat Belt Buckle Components and Components Location

Rear Seat

Other Information:

Categories