Kia Sedona: Rear Bumper Cover Components and Components Location - Rear Bumper - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Rear Bumper Cover Components and Components Location

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Rear Bumper / Rear Bumper Cover Components and Components Location

Component Location

1. Rear Bumper Cover


Components and Components Location
Components 1. Rear bumper side under cover2. Rear bumper side under cover3. Rear bumper beam assembly4. Rear bumper side lower bracket [LH]5. Rear bumper side lower bracket [RH]6. Rear bumper si ...

Rear Bumper Cover Repair procedures
Replacement     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. ...

Other Information:

Intake Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the actuator operates to the recirculation position when 12V is connected to termina ...

Starter Components and Components Location
Components 1. Front bracket assembly2. Clutch set assembly3. Lever4. Lever packing5. Magnetic switch assembly6. Through bolt7. Planet gear 8. Shield9. Armature assembly10. Yoke assembly11. Brush ...

Categories

Copyright © www.kisedona.com 2016-2026