Kia Sedona: Roof Rack Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Body Side Moulding / Roof Rack Repair procedures

Replacement

[General Type]

Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.	Remove the roof rack front cover (A) and roof rack rear cover (B).

2.	Remove the roof rack center cover (C).

After loosening the mounting nuts, remove the roof rack assembly (D).

Tightening torque :

3.9 ~ 4.4 N.m ( 0.4 ~ 0.45 kgf.m, 2.9 ~ 3.3 lb-ft )

Install in the reverse order of removal.

Replace any damaged clips.

1. Roof rack front cover
2. Roof rack rear cover

3. Roof rack center cover
4. Roof rack assembly

Body Side Moulding

...

Roof Side Moulding Repair procedures

Replacement [General Type] Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with pro ...

Other Information:

Power Door Mirror Switch Schematic Diagrams
Circuit Diagram ...

Evaporator Temperature Sensor Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure resistance between terminals “+” and “-” of the evaporator tempera ...

Kia Sedona: Roof Rack Repair procedures

Body Side Moulding

Roof Side Moulding Repair procedures

Other Information:

Categories