Kia Sedona: Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sedona YP Service ManualKia Sedona: Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications

Specification
Item
Specification
Control type
N/L (Normal Low)
Control pressure kpa (kgf/cm², psi)
"9.81 ~ 500.14
(0.1 ~ 5.1, 1.42 ~ 72.54)"
Current value (mA)
50 ~ 850
Coil resistance(Ω)
5.1 ± 0.3

Output Speed Sensor Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. M ...

Torque Converter Control Solenoid Valve (T/CON_VFS) Components and Components Location
Component Location 1. Torque Converter Control Solenoid Valve (T/CON_VFS) ...

Other Information:

EBD(Electronic Brake-force Distribution) Description and Operation
Operation The EBD system (Electronic Brake Force Distribution), a sub-system of the ABS system, controls the maximum braking effectiveness by the rear wheels. It further utilizes the effici ...

In case of an emergency while driving
If the engine stalls at a crossroad or crossing If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. If you h ...

Categories

Copyright © www.kisedona.com 2016-2026