Kia Sedona: Limp home (override) procedure
When you turn the ignition switch to the ON position, if the immobilizer indicator
(
) goes off after blinking 5 times, your
transponder equipped in the ignition key is out of order. You cannot start the engine
without the limp home procedure. To start the engine, you have to input your password
by using the ignition switch. Your password is only available from an authorized
Kia dealership. Contact an authorized dealer for more information.
The following procedure is how to input your password of
Immobilizer system
Your vehicle is equipped with an electronic engine immobilizer system to reduce
the risk of unauthorized vehicle use.
Your immobilizer system is comprised of a small transponder in the ignition key ...
Smart key
...
Other Information:
Tail Gate Back Panel Repair procedures
Replacement
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, an ...
Front side marker
1. Open the hood.
2. Remove the front cover(1) and headlamp assembly nuts(2).
3. Remove the headlamp assembly from the body of the vehicle
4. Remove the socket from the assembly by turning the so ...
Categories
- Home
- First Generation
- Second Generation
- Third generation
- Kia Sedona YP 2014-2026 Owners Manual
- Kia Sedona YP 2014-2026 Service Manual
