Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver. |
3. |
Remove the room lamp (A) after loosening the screws. |
4. |
Disconnect the room lamp connector (A). |
1. |
Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver. |
2. |
Disconnect the room lamp bulb (A). |
Installation |
1. |
Connect the room lamp connector. |
2. |
Install the room lamp. |
3. |
Install the room lamp lens. |
4. |
Connect the negative (-) battery terminal. |
Aluminum wheel maintenance
The aluminum wheels are coated with a clear protective finish.
Do not use any abrasive cleaner, polishing compound, solvent, or wire brushes
on aluminum wheels. They may scratch the finish.
C ...
Rear Coil Spring Repair procedures
Removal
1.
Remove the rear wheel and tire (A) from rear hub.
Tightening torque :
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
Be careful not to damage ...