Components |
1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body | 5. Inner pad shim 6. Brake pad 7. Pad retainer |
Manifold Absolute Pressure Sensor (MAPS) Repair procedures
Inspection
1.
Connect the GDS to the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Pressure [kPa (kgf/cmВІ, psi)]Output Voltage (V) [Ref=5V]20.0 (0 ...
Emergency starting
Connect cables in numerical order and disconnect in reverse order. ...