Kia Sedona: Oil Level Gauge & Pipe Repair procedures

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Engine Mechanical System / Lubrication System / Oil Level Gauge & Pipe Repair procedures

Removal and Installation

Remove the oil level gauge rod (A) and the oil level gauge (B).

Tightening torque:

18.6 ~ 22.6 N.m (1.9 ~ 2.3 kgf.m, 13.7 ~ 16.6 lb-ft)

When installing, apply engine oil to the O-ring and take care the O-ring not to be damaged.

Always use a new O-ring.

2.	Install in the reverse order of removal.

Oil Level Gauge & Pipe Components and Components Location

Components 1. Oil level gauge2. Oil level gauge pipe3. O-ring ...

Timing System

...

Other Information:

Front windshield washers
In the OFF position, pull the lever gently toward you to spray washer fluid on the windshield and to run the wipers 1-3 cycles. Use this function when the windshield is dirty. The spray and wipe ...

Starter Relay Repair procedures
Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery terminal. 2. Remove the fuse box cover. 3. Remove the starter relay (A). 4. Check for continuity between ...

Kia Sedona: Oil Level Gauge & Pipe Repair procedures

Oil Level Gauge & Pipe Components and Components Location

Timing System

Other Information:

Categories