Kia Sedona: License plate light bulb replacement - Light bulbs - Maintenance - Kia Sedona YP Owners ManualKia Sedona: License plate light bulb replacement

Third generation YP (2014-2020) / Kia Sedona YP Owners Manual / Maintenance / Light bulbs / License plate light bulb replacement

1. Loosen the lens retaining screws with a phillips head screwdriver.

2. Remove the lens.

3. Remove the bulb by pulling it straight out.

4. Install a new bulb.

5. Reinstall the lens securely with the lens retaining screws.

High mounted stop lamp replacement
1. Open the tailgate. 2. Gently remove the center cover of the rear tailgate trim. 3. Disconnect the electrical connector. 4. Loosen the retaining nuts and remove the spoiler. 5. Remove the ...

Interior light bulb replacement
Map lamp Room lamp Glove box lamp Luggage lamp Vanity mirror lamp ...

Other Information:

How does the air bag system operate
Air bags are activated (able to inflate if necessary) only when the ignition switch is turned to the ON or START position. The appropriate air bags inflate instantly in the event of a serious ...

Auto Defogging Sensor (DATC only) Description and Operation
Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal to blow out wind for defogging if moisture occurs. On receiving the signal from ...

Categories

Copyright В© www.kisedona.com 2016-2020