Kia Sedona: Input Speed Sensor Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sedona YP Service ManualKia Sedona: Input Speed Sensor Specifications

Third generation YP (2014-2026) / Kia Sedona YP Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Input Speed Sensor Specifications

Specification
Item
Specification
Type
Hall effect sensor
Operation condition (°C)°F
(-40 ~ 150)-40 ~ 302
Output voltage (V)
High: 1.18 ~ 1.68
Low: 0.59 ~ 0.84

Transaxle Oil Temperature Sensor Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. Disconnect the solenoid valve connector (A). 4. Me ...

Input Speed Sensor Components and Components Location
Component Location 1. Output speed sensor 2. Input speed sensor ...

Other Information:

Outside rearview mirror
Be sure to adjust the mirror angles before driving. Your vehicle is equipped with both left-hand and right-hand outside rearview mirrors. The mirrors can be adjusted remotely with the remote switch ...

Power tailgate non-opening conditions
The power tailgate will not open automatically, but will close under the following conditions. When the ignition switch is in the ON position, 1. Vehicle is moving above 3 km/h (2 mph). 2. The ge ...

Categories

Copyright © www.kisedona.com 2016-2026