Replacement |
1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”) |
2. |
Disconnect the fuel sender connector (A) and fuel pump connector (B). |
3. |
Remove the cushion pipe fixing clip (A), and then separate the head assembly (B) from reservoir cup. |
4. |
Remove the reservoir cup (B) after releasing the fixing hook (A). |
5. |
Disconnect the ground line (A). |
6. |
Separate the fuel pump motor and filter after remove the fuel pump motor (A). |
7. |
Install in the reverse order of removal. |
High Beam Indicator Light
This indicator light illuminates :
When the headlights are on and in the high beam position
When the turn signal lever is pulled into the Flash-to-Pass position.
...
Inhibitor Switch Schematic Diagrams
Circuit Diagram
...