Kia Sedona: Description and Operation - Emission Control System - Kia Sedona YP Service ManualKia Sedona: Description and Operation

Third generation YP (2014-2025) / Kia Sedona YP Service Manual / Emission Control System / Description and Operation

Description
Emissions Control System consists of three major systems.
•
Crankcase Emission Control System prevents blow-by gas from releasing into the atmosphere. This system recycles gas back into the intake manifold (Closed Crankcase Ventilation Type).
•
Evaporative Emission Control System prevents evaporative gas from releasing into the atmosphere. This system burns gas at appropriate engine operating condition after gathering it in the canister.
•
Exhaust Emission Control System converts the three pollutants [hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx)] into harmless substances by using the 3-way catalytic converter.
Components and Components Location
Components Location 1. PCV Valve2. Canister3. Purge Control Solenoid Valve (PCSV)4. Fuel Tank Pressure Sensor (FTPS)5. Canister Close Valve (CCV)6. Fuel Level Sender (FLS)7. Fuel Tank Air Filt ...

Schematic Diagrams
Schematic Diagram ...

Other Information:

Armed stage
Park the vehicle and stop the engine. Arm the system as described below. 1. Remove the ignition key from the ignition switch and exit the vehicle. 2. Make sure that all doors (and tailgate) and engi ...

Blind Spot Detection Unit Repair procedures
Removal Blind spot detection (BSD) unit 1. Disconnect the negative (-) battery terminal.     Be careful when removing the blind spot detection unit. The bracket may brea ...

Categories


Copyright © www.kisedona.com 2016-2025