Kia Sedona: Cowl Side Trim Repair procedures - Interior Trim - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Cowl Side Trim Repair procedures

Third generation YP (2014-2020) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Interior Trim / Cowl Side Trim Repair procedures

Replacement
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
   
Take care not to bend or scratch the trim and panels.
[LH]
1.
Remove the front door scuff trim.
(Refer to Interior Trim - "Door Scuff Trim")
2.
Remove the hood latch release handle.
(Refer to Hood - "Hood Latch Release Handle")
3.
Remove the front door body side weatherstrip.
4.
Using a screwdriver or remover, remove the cowl side trim (A).

5.
Install in the reverse order of removal.
   
Replace any damaged clips.
[RH]
1.
Remove the front door scuff trim.
(Refer to Interior Trim - "Door Scuff Trim")
2.
Slighty remove the front door body side weatherstrip.
3.
Using a screwdriver or remover, remove the cowl side trim (A).

4.
Install in the reverse order of removal.
Cowl Side Trim Components and Components Location
Component Location 1. Cowl side trim ...

Front Pillar Trim Components and Components Location
Component Location 1. Front pillar trim ...

Other Information:

Seatback angle
To recline the seatback : 1. Lean forward slightly and lift up the seatback recline lever. 2. Carefully lean back on the seat and adjust the seatback of the seat to the position you desire. 3. ...

Battery replacement
The transmitter uses a 3 volt lithium battery which will normally last for several years. When replacement is necessary, use the following procedure. 1. Insert a slim tool into the slot and gentl ...

Categories

Copyright © www.kisedona.com 2016-2020