Kia Sedona: Checking the washer fluid level - Washer fluid - Maintenance - Kia Sedona YP Owners ManualKia Sedona: Checking the washer fluid level

Third generation YP (2014-2026) / Kia Sedona YP Owners Manual / Maintenance / Washer fluid / Checking the washer fluid level

The reservoir is translucent so that you can check the level with a quick visual inspection.

Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use washer solvent with antifreeze characteristics in cold climates to prevent freezing.

WARNING - Flammable Fluid

Do not allow the washer fluid to come in contact with open flames or sparks.The windshield washer fluid reservoir is flammable under certain circumstances. This can result in a fire.

Washer fluid
...

Parking brake
Checking the parking brake Check whether the stroke is within specification when the parking brake pedal is depressed with 30 kg (66 lb, 294 N) of force. Also, the parking brake alone should se ...

Other Information:

Air bag collision sensors
(1) SRS control module/ Rollover sensor (2) Front impact sensor (3) Side impact sensor (4) Side pressure sensor WARNING - Air bag sensors Do not hit or allow any objects to impact the lo ...

Field Effect Transistor (DATC) Repair procedures
Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Operate the control switch to raise the voltage up to high ...

Categories

Copyright © www.kisedona.com 2016-2026