Kia Sedona: Brake Pedal Components and Components Location - Brake System - Brake System - Kia Sedona YP Service ManualKia Sedona: Brake Pedal Components and Components Location

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Brake System / Brake System / Brake Pedal Components and Components Location

Components

1. Cowl bracket
2. Brake pedal member assembly
3. Brake switch
4. Return spring
5. Brake pedal stopper
6. Clevis pin
7. Snap pin
8. Brake pedal

Brake Line Repair procedures
Removal 1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder reservior with a syringe.   &nb ...

Brake Pedal Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel and reinforcing panel. (Refer to the Body group- crash pad). 3. Remov ...

Other Information:

Auto Defogging Sensor (DATC only) Repair procedures
Inspection To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC guide. Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the auto defogging se ...

Rear mode selection
Front climate control is MAX A/C, : Rear air blows from the upper vents on the rear ceiling. Front climate control is : Rear air blows from the upper vents on the rear ceiling and the l ...

Categories


Copyright В© www.kisedona.com 2016-2024